Product Details:
Usage/Application | Hospital |
Material | Mild Steel |
Power Consumption | 50 watts (230V, 50 Hz) |
Max Vacuum | 700mm Hg |
Infusion Rate | 30-300 ml/mt |
Infused Volume | 0-9.99 litres |
Cumulative Volume | 0-99.9 litres |
Free Flow Rate | 90 litres/min |
Noise Level | <56 dB |
Unit Size | 360 x 385 x 740 mm |
Unit Gross Weight | 30 Kgs |
TULIP COMBI – TUMESCENT LIPOSUCTION SYSTEM
Tulip Combi is a combination surgical pump system used in tumescent liposuction procedures for fast removal of body fat from subcutaneous layers. The infiltration pump is provided with a flow rate (30-300 ml/min) control through a footswitch for precise infusion of tumescent fluid. The infused volume per fat pocket/body limb as well as cumulative infused volume can be digitally monitored.
The oil less piston vacuum pump produces a high vacuum (-700mm Hg) at a high evacuation rate (90 litres/min) capable of sucking out even the stickiest fat mass. The whole equipment operates at a very low noise level (56 db) and is wheel mounted for easy mobility.
SALIENT FEATURES
> Imported 90 Liters/min high power oil - free piston vacuum pump
> Digital footswitch controlled variable infiltration (30-300 ml/min)
> Imported roller pump for infiltration and piston pump for suction
> Imported Anti-bacterial filter provided in suction line eliminates air borne contamination
> Efficient overflow/backflow protection float assembly provided for suction jars.
> Transparent high quality polycarbonate jars with graduation marks.
> Changeover valve provided for selection of suction jars of different capacities.
> Variable Max. vacuum.
> Suction unit can also be used for laparoscopic surgeries as well as open procedures.
> Compact, relatively silent operation (< 56 db) with mobility is an added advantage.
> 0.3 HP Motor – low power consumption.
> Rated for 8-hour continuous duty.
> Rust free , long life powder Coated Aluminum body.
STANDARD ACCESSORIES
Suction jar (Polycarbonate) 4 litres capacity: 1 No.
Suction jar (Polycarbonate) 2 litres capacity: 1 No.
Single pedal footswitch: 1 No.
Infiltration tubing (silicone rubber tube): 1 Set
Liposuction tubing (silicone rubber tube): 2 Sets
Hydrophobic filters: 2 Nos
APPLICATIONS > Liposuction – Cosmetic Surgery
TECHNICAL SPECIFICTION
Infiltration Pump
Infusion rate: 30-300ml/min (Upgradable to 600ml/min)
Infused volume: 0 - 9.99 litres
Cumulative volume: 0 - 99.9 litres
Memory for infusion: Digital display provided
Infusion control: Through single pedal footswitch
Power consumption: 50 watts
Suction Pump
Max. Vacuum: (-) 700mm Hg (Variable)
Free flow rate: 90 litres/min
Suction jars (polycarbonate): 4 litres + 2 litres
Noise level: <56 db
Tubing: Autoclavable
Power consumption: 180 watts (0.3 HP)
Physical dimension: 360 x 385 x 740mm
Total power consumption: 230 watts (230 V, 50 Hz.)
Mounting: Trolley mounted
Gross weight: 30 Kg
*Due to continuous improvement in design for compliance with international standards, the technical specifications & physical appearance is subject to alterations without notice.
Product Details:
Minimum Order Quantity | 1 Piece |
Portable | Yes |
Model Name/Number | SPARK 400 |
Power Output | 400 Watts |
Brand | SPARK |
Type Of Tens Unit | Handheld |
Modes Of The TENS Unit | Continuous |
Automation Grade | Automatic |
Usage/Application | Hospital |
SPARK 400 – 400 W Programmable Underwater Cutting Surgical Diathermy
This is a multipurpose 400W programmable surgical diathermy for open and endoscopic surgical procedures.
Cut & Coag power can be set in precise values with digital control. Monopolar cutting of upto 400 Watts with 100 Watts Monopolar coagulation and Bipolar cutting & coagulation of upto 100 Watts.
Three pedal footswitch, 3 memory storage function, handswitch pencil, reusable silicone rubber patient plate etc. are standard. Optional upgrade to 10 memory function.
SPARK 400 finds extensive use in Gynaec / Urology / Onco / Ortho / Gastro / ENT / Neuro and all open & endoscopic surgical applications
SALIENT FEATURES
> SALIENT FEATURES OF SPARK 400
> 3 Memory function for easy daily operation
> HF Power display: Digital LED display
> HF output power can be set digitally in small increments.
> Monopolar Output via Handswitch Pencil.
> Pure / Rapid / Blend modes for monopolar cutting.
> Dedicated TUR / TCRE Output.
> Forced / Spray / Soft modes for monopolar coagulation
> Combined or independent use of mono & bipolar functions enabled.
> Autoclavable & reusable accessories.
> Audio & visual monitoring of patient plate circuit
> Robust powder coated Aluminum body.
> Relatively charring free whitish bipolar coagulation effects.
> Optional upgrade to add Smoke evacuator
STANDARD ACCESSORIES
> Colour coded three pedal footswitch with cable and connector.
> Silicone Rubber patient plate with detachable connection cable.
> Reusable Active electrode handle with set of 4 electrodes & silicone rubber insulated cable
> Reusable Insulated bipolar forceps with silicone rubber insulated cable.
> Handswitch surgical pencil with cable
APPLICATIONS
> General / Open Surgery
> Neuro Surgery
> ENT Surgery
> All endoscopy procedures
> Gynaec Surgery
> Ortho Surgery
> Cosmetic Surgery
> Hysteroscopy / Arthroscopy / URS
TECHNICAL SPECIFICTION
Working Frequency :500 KHz
Monopolar Cutting: 400 Watts
Mono Cut Modes - PURE / RAPID / BLEND / TUR: YES
Monopolar Coagulation: 100 Watts
Mono Coag modes - FORCE / SPRAY / SOFT: YES
Bipolar Cutting: 100 Watts
Bipolar Coagulation: 100 Watts
Handswitch Output: YES
Programming - 3 memory / Optional – 10: YES
Power rating: 230 V, 50 Hz
Weight: 10.5 Kgs
Dimensions: 400 mm x 370 mm x 140 mm
*Due to continuous improvement in design for compliance with international standards, the technical specifications & physical appearance is subject to alterations without notice.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Operation Mode | Automatic |
Portable/ Non Portable | Portable |
Usage/Application | Medical |
Brand | Univac |
Material | Aluminium |
Pump Type | Piston Pump |
UNIVAC JUMBO – Surgical Suction Pump
UNIVAC Jumbo enables easy cleaning of the surgical site with high power suction for better visibility of the bleeders & fast removal of sticky clots thereby reducing procedure time. This pump finds application in the main OT as a suction pump, in the ER /casualty department for wounds cleaning and in ICUs for fast removal of phlegm. The same pump can be used as suction pump for laparoscopic surgical procedures.
SALIENT FEATURES
> Oil less piston vacuum pump produces fast vacuum at extremely high flow rates.
> Anti-bacterial filter provided in the unit eliminates airborne contamination.
> Efficient over flow/back flow protection float assembly provided for the suction jars.
> Transparent high quality polycarbonate jars with graduation marks.
> Changeover valve helps selection of the suction jars.
> Rated for 6-hour continuous duty.
> Rust-free, long-life powder Coated Aluminum body.
STANDARD ACCESSORIES
Suction jar (Polycarbonate) 2 litres capacity: 2 Nos
Suction tubing (silicone rubber tube): 2 Sets
Hydrophobic filters: 2 Nos
APPLICATIONS
> As a Suction pump for all surgical procedures.
TECHNICAL SPECIFICTION
Max. Vacuum: (-) 700mm Hg (Variable)
Free flow rate: 45 litres/min
Suction jars (polycarbonate): (2 litres + 2 litres) capacity
Power supply: 230 volts, 50Hz
Noise level: <56 db
Power consumption: 180 watts (230V, 50 Hz.)
Mounting: Pedestal mounted
Physical dimension: 360 x 385 x 740mm
Gross weight: 22 Kg
*Due to continuous improvement in design for compliance with international standards, the technical specifications & physical appearance is subject to alterations without notice.
Additional Information:
Product Details:
Brand | Biolap |
Usage/Application | Hospital |
Frequency | 50 Hz |
Voltage | 230 V |
CO2 Insufflation Pressure | Max. 30 mm Hg |
Gas Flow Rate | 30 litres/min (Variable) |
Unit Size | 300 x 325 x 124 mm |
Unit Gross Weight | 7.5 Kgs |
BIOLAP 30 - Heated Carbon Dioxide Insufflator
BIOLAP 30 is a 30 L/min high flow heated CO2 insufflator which is microprocessor controlled and has high performance capability
SALIENT FEATURES
> Inbuilt high-pressure regulator -High pressure CO2 from the main cylinder can be connected directly
> Microcontroller based closed loop technology ensures precise control of pressure/flow parameters
> Set pressure and actual pressure displayed, max of 30 mmHg
> Set flow and actual flow displayed, max of 30 L/min
> Pumped volume display
> Actual cylinder pressure display
> Gas heater temperature display
> Electronic memory retains last set values of pressure, flow rate and pumped gas volume
> Inbuilt gas warmer provides warm CO2 at trocar minimizing fogging
> Continuous gas flow controller ensures stable abdominal distention during surgery.
> Automatic Trocar / Veress mode switching
STANDARD ACCESSORIES
> 1 set tubing for insufflation
> 1 High pressure hose
> 1 double headed spanner
> 1 Hydrophobic filter
APPLICATIONS
> All laparoscopy procedures
FRONT PANEL DISPLAYS AND CONTROLS
> Cylinder pressure, low pressure indicator
> Preset pressure, Actual pressure
> Preset Flow rate, Actual Flow rate
> Pumped gas volume counter with Reset button
> Outlet gas temp with heater on indicator
> Gas flow start/stop button with indicator
TECHNICAL SPECIFICTION
Insufflation pressure: Max. 30mm Hg (Variable)
Gas flow rate: 30 litres/min (Variable)
Gas consumption: Display provided
Gas temperature: Display provided
Cylinder pressure: Display provided
Power supply: 230V, 50 Hz
Physical dimensions: 300 x 325 x 124 mm
Gross weight: 7.5 Kg
*Due to continuous improvement in design for compliance with international standards, the technical specifications & physical appearance is subject to alterations without notice.
Product Details:
Luminous Power | 1,30,000 lux/ 1 m per dome |
Colour Temperature | 4900 K |
Illuminance Field | 10 cm - 19 cm per dome |
Colour Rendering Index Ra | 95 |
Intensity Control | 15 steps |
Supply Voltage | 230 V/50 Hz AC |
Lamp Housing | Polycarbonate |
Power Consumption | Approx 60 W |
Light Head Weight | 5.5 Kgs |
Trolley Weight | 17 Kgs |
Wall Arm Weight | 7.5 Kgs |
Single Ceiling Weight | 12.5 Kgs |